[GTALUG] ot: headphone jac replacement?

[Karen Lewellen]

What is thread locker?
Keep in mind i am working via touch alone here.
i do have the ring as expressed, so just where would thread locker go, and 
from where is it obtained?
Karen



On Tue, 20 Apr 2021, Don Tai wrote:

> In order to screw on the ring, some of the threads from the audio jack must
> be exposed. Otherwise the ring would not be able to grab on and tighten.
> You don't need too many threads. Put the thread locker on those few
> threads, reinstall the ring and you should be good. Or put the thread
> locker on the inside of the ring.
>
> Without the ring, the audio jack may have rotated and might have interfered
> with the audio wires, possibly kinking them.
>
> Don
>
> On Tue, 20 Apr 2021 at 23:23, Karen Lewellen <klewellen at shellworld.net>
> wrote:
>
>> The thing is that the audio jack threads are not exposed.
>> So, I would have to put this liquid in the case of the machine..which does
>> not seem safe under the circumstances.
>> Sorry about the misspellings, the synthesizer I am using is not fully
>> functional.
>> The ring cannot simply be placed back and screwed down?
>> i have no idea how I would use locktite if the threads must be reached.
>>
>> ---thread cut for brevity
>