WRT54GL cheap (refurb)

[Sammy Lao]

With a WRT54GL, you can do stuff like this:
http://lifehacker.com/#!178132/hack-attack-turn-your-60-router-into-a-600-router

There are also some dev's that are turning these things into little
Plug Servers: Print Servers, File Servers, etc.
http://en.wikibooks.org/wiki/Tomato_Firmware

On Thu, Apr 28, 2011 at 1:05 PM, Colin McGregor <colin.mc151-Re5JQEeQqe8AvxtiuMwx3w at public.gmane.org> wrote:
> On Thu, Apr 28, 2011 at 12:08 PM, Alex Volkov <avolkov-Re5JQEeQqe8AvxtiuMwx3w at public.gmane.org> wrote:
>> I think you've got amount of RAM and Flash wrong.
>
> Yes, typo on my part.
>
>> From wikipedia http://en.wikipedia.org/wiki/Linksys_WRT54G_series
>> WRT54GL has 4MB of flash and 16MB of RAM. Which makes sense as routers
>> need to store state info and all the services that would use more
>> memory than just what they have on flash, in addition flash filesystem
>> is usually squashfs which supports compression. Of course the models
>> that have 32MB of ram 8MB of flash are the best.
>>
>> Although my prefered router right now is  tl-wr1043nd I give so much
>> love for it because it runs OpenWRT out of the box, and runs it pretty
>> well.
>
> Good point, the likes of OpenWRT and some of the other Linux router
> distributions will run on multiple brands of routers. For example you
> can see a list of what Tomato will run on here :
> www.polarcloud.com/tomatofaq#what_will_this_run_on . The comparable
> list for OpenWRT can be seen here : http://wiki.openwrt.org/toh/start
> .
>
> The things going for the Linksys routers like the WRT54GL are, they
> are easily found, (usually) very reliable, and inexpensive. But if you
> have (or can easily/inexpensively get) one of the other supported
> routers go for it, drop in a replacement firmware and have some fun.
>
> Colin McGregor
>
>> Alex.
>>
>>
>>
>> On Thu, Apr 28, 2011 at 9:35 AM, Colin McGregor <colin.mc151-Re5JQEeQqe8AvxtiuMwx3w at public.gmane.org> wrote:
>>> On Thu, Apr 28, 2011 at 8:33 AM, Giles Orr <gilesorr-Re5JQEeQqe8AvxtiuMwx3w at public.gmane.org> wrote:
>>>> http://ncix.com/products/index.php?sku=56129&vpn=WRT54GL-RM&manufacture=Linksys&promoid=1097
>>>>
>>>> Linksys WRT54GL "Linux Version" (whatever that means ... did they
>>>> already flash the firmware?) refurbished, $25.  Plus of course the
>>>> fine print: "does not include shipping, handling, or taxes, limited
>>>> time offer etc. etc."  It's a good price if you don't mind refurb and
>>>> wireless-G.
>>>
>>> A bit of history here... First you had the WRT54G router which in
>>> versions 1 to 4 had 16 MB of flash memory and 4 MB of RAM. Versions 1
>>> to 4 also had a Linux kernel and after foot dragging (and lawsuit)
>>> Linksys released the source code, this was followed by the community
>>> creating Linux firmware to replace the Linksys supplied firmware (best
>>> known replacements being Tomato Linux and DD-WRT (there are others)).
>>> This then created a small cottage industry of creating custom routers
>>> for specific tasks, like how would you like the Asterix PBX software
>>> on your router (this has been done)... After version 4 of the WRT54G
>>> Linksys made the router with 8MB of flash, 4 MB of RAM and a
>>> proprietary OS. While very stripped Linux versions have been made to
>>> run on the post version 4 WRT54G, options are rather limited. The good
>>> news, Linksys has continued to build what are in effect version 4
>>> WRT54G routers under the name WRT54GL (and yes the WRT54GL has a Linux
>>> kernel...). So, if you want to be able to fairly painlessly modify
>>> your router have a close look at the WRT54GL, one of the old version 1
>>> to 4 WRT54G routers, or the early WRT54GS (versions 1 to 3 had 32 MB
>>> flash and 8 MB RAM).
>>>
>>> For my home network, I have a WRT54GS version 2 and a WRT54G version 3
>>> both currently running Tomato Linux :-) .
>>>
>>> So, a $25 router that you can easily customize, well, if I didn't
>>> already have an early WRT54G, I'd want a WRT54GL :-) .
>>>
>>>
>>> Colin McGregor
>>>
>>> For a detailed list of the WRT54G series routers and their specs see :
>>> http://en.wikipedia.org/wiki/Linksys_WRT54G_series
>>>
>>>> --
>>>> Giles
>>>> http://www.gilesorr.com/
>>>> gilesorr-Re5JQEeQqe8AvxtiuMwx3w at public.gmane.org
>>>> --
>>>> The Toronto Linux Users Group.      Meetings: http://gtalug.org/
>>>> TLUG requests: Linux topics, No HTML, wrap text below 80 columns
>>>> How to UNSUBSCRIBE: http://gtalug.org/wiki/Mailing_lists
>>>>
>>> --
>>> The Toronto Linux Users Group.      Meetings: http://gtalug.org/
>>> TLUG requests: Linux topics, No HTML, wrap text below 80 columns
>>> How to UNSUBSCRIBE: http://gtalug.org/wiki/Mailing_lists
>>>
>> --
>> The Toronto Linux Users Group.      Meetings: http://gtalug.org/
>> TLUG requests: Linux topics, No HTML, wrap text below 80 columns
>> How to UNSUBSCRIBE: http://gtalug.org/wiki/Mailing_lists
>>
> --
> The Toronto Linux Users Group.      Meetings: http://gtalug.org/
> TLUG requests: Linux topics, No HTML, wrap text below 80 columns
> How to UNSUBSCRIBE: http://gtalug.org/wiki/Mailing_lists
>
--
The Toronto Linux Users Group.      Meetings: http://gtalug.org/
TLUG requests: Linux topics, No HTML, wrap text below 80 columns
How to UNSUBSCRIBE: http://gtalug.org/wiki/Mailing_lists