emu 1212m pci on ubuntu 7.10

Tue Jan 22 22:01:43 UTC 2008

Lennart Sorensen wrote:
> On Tue, Jan 22, 2008 at 03:30:39PM -0500, Christopher Aitken wrote:
>   
>> Actually, I did. I didn't want to mention it because I was afraid it 
>> would sound to Microsoftish.
>>
>> After I rebooted I ran alsamixer - the old card is still the only one 
>> listed. Maybe it sees the card but I just don't know how to get 
>> alsamixer to show it.
>>     
>
> alsamixer shows the first card by default.  Check /proc/asound/cards to
> get a list.  If it is there, you should be able to tell alsamixer to
>   
It's still not showing up:

chris at cpc:~$ cat /proc/asound/cards
 0 [I82801BAICH2   ]: ICH - Intel 82801BA-ICH2
                      Intel 82801BA-ICH2 with AD1885 at irq 20
chris at cpc:~$

> look at the second card.  You can also add module options to set the
> index number on each card if you want the EMU first.
>
> What does dmesg say about sound cards if anything?  Certainly an onboard
>   
Okay, here is where the emu stuff starts. I'm assuming this means that 
at least I don't have to open the computer to reseat the card...

[   51.749233] emu1010: Special config.
[   51.749322] emu1010: EMU_HANA_ID=0x7f
[   52.654513] firmware: emu/hana.fw not found. Err=-2
[   52.654527] emu1010: Loading Hana Firmware file emu/hana.fw failed
[   52.658856] ACPI: PCI interrupt for device 0000:02:0a.0 disabled
[   52.658891] EMU10K1_Audigy: probe of 0000:02:0a.0 failed with error -2
[   52.659228] PCI: Enabling device 0000:00:1f.5 (0004 -> 0005)
[   52.659252] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, 
low) -> IRQ 20
[   52.659291] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[   53.280637] intel8x0_measure_ac97_clock: measured 55945 usecs
[   53.280649] intel8x0: clocking to 41155
[   54.094968] loop: module loaded
[   54.136195] lp0: using parport0 (interrupt-driven).
[   54.334157] Adding 489848k swap on /dev/md1.  Priority:-1 extents:1 
across:489848k
[   54.459781] eth0: no IPv6 routers present
[   54.774660] EXT3 FS on md0, internal journal
[   55.678581] kjournald starting.  Commit interval 5 seconds
[   55.714188] EXT3 FS on md2, internal journal
[   55.714203] EXT3-fs: mounted filesystem with ordered data mode.
[   57.517647] input: Power Button (FF) as /class/input/input4
[   57.518292] ACPI: Power Button (FF) [PWRF]
[   57.549629] input: Power Button (CM) as /class/input/input5
[   57.550311] ACPI: Power Button (CM) [PBTN]
[   57.776980] No dock devices found.
[   61.147447] ppdev: user-space parallel port driver
[   61.558316] audit(1201002883.359:3):  type=1503 
operation="inode_permission" requested_mask="a" denied_mask="a" 
name="/dev/tty" pid=4981 profile="/usr/sbin/cupsd"
[   61.693785] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   61.693800] apm: overridden by ACPI.
[   62.279149] Failure registering capabilities with primary security 
module.
[   62.625904] Bluetooth: Core ver 2.11
[   62.626236] NET: Registered protocol family 31
[   62.626244] Bluetooth: HCI device and connection manager initialized
[   62.626254] Bluetooth: HCI socket layer initialized
[   62.656883] Bluetooth: L2CAP ver 2.8
[   62.656896] Bluetooth: L2CAP socket layer initialized
[   62.674043] Bluetooth: RFCOMM socket layer initialized
[   62.674288] Bluetooth: RFCOMM TTY layer initialized
[   62.674296] Bluetooth: RFCOMM ver 1.8
[18747.718415] Failure registering capabilities with primary security 
module.
[18774.639841] audit(1201021609.926:4):  type=1503 
operation="inode_permission" requested_mask="a" denied_mask="a" 
name="/dev/tty" pid=7258 profile="/usr/sbin/cupsd"
[34157.184734] 
/build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: 
usblp0: removed
[34159.869351] audit(1201037006.303:5):  type=1503 
operation="inode_permission" requested_mask="rw" denied_mask="rw" 
name="/dev/tty" pid=7926 profile="/usr/sbin/cupsd"
[34160.857592] audit(1201037007.304:6):  type=1503 
operation="inode_permission" requested_mask="rw" denied_mask="rw" 
name="/dev/tty" pid=7929 profile="/usr/sbin/cupsd"
[34265.042544] audit(1201037111.309:7):  type=1503 
operation="inode_permission" requested_mask="rw" denied_mask="rw" 
name="/dev/tty" pid=8235 profile="/usr/sbin/cupsd"
[34265.216972] audit(1201037111.309:8):  type=1503 
operation="inode_permission" requested_mask="rw" denied_mask="rw" 
name="/dev/tty" pid=8238 profile="/usr/sbin/cupsd"
[35021.928563] audit(1201037868.853:9):  type=1503 
operation="inode_permission" requested_mask="rw" denied_mask="rw" 
name="/dev/tty" pid=8429 profile="/usr/sbin/cupsd"
[35022.243957] audit(1201037868.853:10):  type=1503 
operation="inode_permission" requested_mask="rw" denied_mask="rw" 
name="/dev/tty" pid=8443 profile="/usr/sbin/cupsd"
chris at cpc:~$

Chris
> AC97 won't show much.  Perhaps the EMU shows a bit more.
>
> --
> Len Sorensen
> --

--
The Toronto Linux Users Group.      Meetings: http://gtalug.org/
TLUG requests: Linux topics, No HTML, wrap text below 80 columns
How to UNSUBSCRIBE: http://gtalug.org/wiki/Mailing_lists