cdrwrite error caused by data ?

[Peter]

Hi all,

I have a cdrwrite problem. I am trying to burn a iso image of PCBSD-1.0 
using cdrwrite on linux. The cdrwrite gives an IO error after 22MB ?! I 
tried to run it with -dummy and it gives the same error. I verified the 
file (538MB) and it is ok. I am stumped ?! - any ideas are welcome.

thanks,
Peter

(note: burning a real disk stops after 22MB and gives the same error)

(is someone playing a prank on me ?!)

The output from cdrwrite is as follows:

Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 01:   22 of  538 MB written (fifo   3%) [buf 100%] 
8.1x.cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 2D 0C 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F1 00 05 00 00 2D 0C 0C 00 00 00 00 10 02 00 00
Sense Key: 0x5 Illegal Request, deferred error, Segment 0
Sense Code: 0x10 Qual 0x02 (id crc or ecc error) [No matching qualifier] 
Fru 0x0
Sense flags: Blk 11532 (valid)
cmd finished after 0.001s timeout 40s

write track data: error after 23617536 bytes
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
Writing  time:   28.413s
Average write speed 129.5x.
Min drive buffer fill was 97%
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time:    0.011s
cdrecord: fifo had 404 puts and 373 gets.
cdrecord: fifo was 4 times empty and 98 times full, min fill was 0%.

--
The Toronto Linux Users Group.      Meetings: http://tlug.ss.org
TLUG requests: Linux topics, No HTML, wrap text below 80 columns
How to UNSUBSCRIBE: http://tlug.ss.org/subscribe.shtml