bridge eth1 to eth0?

Matt Price matt.price-H217xnMUJC0sA/PxXw9srA at public.gmane.org
Fri Dec 29 20:51:30 UTC 2006


hi,

for stupid reasons I need to install via netboot on a compaq tablet
(hoping this will work, it's my last shot!).  I have an ubuntu desktop
with two ethernet cards, eth0 & eth1, and have set up dhcp & tftp on
eth1 as documented in various places on the web, e.g. here:

http://www.debian-administration.org/articles/478


this works fine to a point.  I have the ubuntu edgy netboot images
in /var/lib/tftpboot, my tablet starts up with pxe, finding the images,
and is ready to install but cannot find the broader internet 0-- it
doesn't seem to see past the eth1 subnet.  So, probably a simple
question:  how  do I enable the eth1 traffic to bridge across to eth0
and thus access the whole internet?  I guess it has something to do with
ip forwarding or ip masquarading or one of those very scary and arcane
pieces of dark magic.  

I don't want to makethis pre-new year's post too long and am not sure
which pieces of info arethe most relevant but here's
the /etc/network/interfaces on the desktop:

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
#iface eth0 inet dhcp
iface eth0 inet static
address 192.168.2.210
netmask 255.255.255.0
gateway 192.168.2.1

auto eth1 
#iface eth1 inet dhcp
# The second network card with static ip
iface eth1 inet static
      address 192.168.0.1
      netmask 255.255.255.0
      network 192.168.0.0

--------------
I should maybe say that eth0 attaches to a cheap wireless router --
simple but not very flexible.  The router is then in turn attached
through a cable modem to the local cable network.

thanks and please let me know what other info I should provide.  
Matt


-- 
Matt Price
History Dept
University of Toronto
matt.price-H217xnMUJC0sA/PxXw9srA at public.gmane.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
URL: <http://gtalug.org/pipermail/legacy/attachments/20061229/ffda26f6/attachment.sig>


More information about the Legacy mailing list