[GTALUG] (very off topic) torque spec of impact wrench

[Scott Allen]

On Fri, 3 Nov 2023 at 09:32, Don Tai via talk <talk at gtalug.org> wrote:
> Once loosened then add some anti-seize compound so that this does not happen again in the future.

Anti-seize compound will reduce the friction between the threads, so
if you use the recommended torque for the nuts you will end up over
torquing them. It's difficult to know what the proper torque value to
use if anti-seize compound or other corrosion inhibitors are used.

-- 
Scott