[GTALUG] Problem with /dev/ttyUSB* serial port
Alvin Starr
alvin at netvel.net
Thu Oct 31 08:16:15 EDT 2019
On 10/31/19 2:25 AM, Jim Ruxton via talk wrote:
> I have a device plugged into an active USB extender that usually shows
> up as /dev/ttyUSB0 when I first plug it in (occasionally it will show
> up as /dev/ttyUSB1 when first plugging it in) . If it is /dev/ttyUSB0
> when I unplug it and plug it back in it occasionally changes to
> /dev/ttyUSB1 . Is there a way that I can always have it show up as
> /dev/ttyUSB0 . I'm not sure why /dev/ttyUSB0 isn't being released and
> restarted after unplugging and replugging it. If I look in /dev it
> does disappear as /dev/ttyUSB0 from there when I unplug it but like I
> said it reappears as /dev/ttyUSB1? I am on Ubuntu 18.04.3 LTS .
>
> Thanks for any pointers.
Thinking on this some more.
You could try using /dev/serial/by-path or /dev/serial/by-id
"ls /dev/serial/by-path/" -> pci-0000:00:12.2-usb-0:3.5:1.0-port0
"ls /dev/serial/by-id" ->
usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0
These should stay device and connection tree uinque
--
Alvin Starr || land: (647)478-6285
Netvel Inc. || Cell: (416)806-0133
alvin at netvel.net ||
More information about the talk
mailing list