[GTALUG] Poweredger server question

[Bob Jonkman]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

If there's a hardware RAID controller it may need its battery changed
(if it has one). Some RAID controllers keep the config in NVRAM, so
/dev/zero may not help that much.  If the drives are recognized by
the OS it may be better to use OS RAID, and eliminate the dependency on
potentially flakey, unreplaceable hardware.

- --Bob.


On 17/08/15 07:48 AM, Brent Kimberley wrote:
> ‎Using the service tag, go to support.dell.com and read the 
> manual(s), drivers, firmware etc. Press control C or R at boot up
> to access the raid config. Don't forget to check / upgrade the 
> firmware.
> 
> From: o1bigtenor Sent: Sunday, August 16, 2015 23:33 To: GTALUG
> Talk Reply To: GTALUG Talk Subject: [GTALUG] Poweredger server
> question
> 
> 
> Greetings
> 
> Managed to buy a Dell poweredge 2950II server.
> 
> What an odyssey to set up the bios!!!
> 
> I have 2 drives I got with the machine - - - they were part of a
> Raid 5 array. Now there are only 2 drives (will never by a raid 5
> array by definition) and I need some way of formatting them so that
> I can turn them into a Raid 1 array. (Its all hardware raid on this
> box.)
> 
> Anyone with any idea on how to do that to scsi drives when the 
> controller won't let me change their settings and I have no other
> pox to put them in. (Connector is a wee bit different than for
> SATA!)
> 
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.20 (GNU/Linux)
Comment: Ensure confidentiality, authenticity, non-repudiability

iEYEARECAAYFAlXSA88ACgkQuRKJsNLM5eoYwwCdGBi2BtPGs6hKsM9gAhAZ/fyi
4cUAoP8n7E58vyhSNT+TThpiyjg1ymlG
=eSBG
-----END PGP SIGNATURE-----