[GTALUG] UEFI bios/firmware

[Abby]

Thanks KevinI will give that a try.Abby


Sent from my Samsung device

-------- Original message --------
From: Kevin Cozens <kevin at ve3syb.ca> 
Date: 08-07-2015  16:39  (GMT-05:00) 
To: talk at gtalug.org 
Subject: Re: [GTALUG] UEFI bios/firmware 

On 15-08-07 03:41 PM, Steve Harvey wrote:
>    1) getting the attention of the firmware that runs on initial startup
> before the operating system (Windows or Linux) gets to start,  and
>
>    2) navigating the setup menus to disable the UEFI.

Once you find the UEFI settings in the BIOS you may find that access to it 
is disabled. You will most likely need to set a supervisor password for the 
BIOS before it will let you have access to the UEFI settings. Just remember 
to remove the supervisor password when you are done (if you don't want/need it).

-- 
Cheers!

Kevin.

http://www.ve3syb.ca/           |"Nerds make the shiny things that distract
Owner of Elecraft K2 #2172      | the mouth-breathers, and that's why we're
                                 | powerful!"
#include <disclaimer/favourite> |             --Chris Hardwick
---
Talk Mailing List
talk at gtalug.org
http://gtalug.org/mailman/listinfo/talk
​​​​​​​​​
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://gtalug.org/pipermail/talk/attachments/20150807/e71851b6/attachment.html>