More USB woes

Fabio FZero fabio.fzero-Re5JQEeQqe8AvxtiuMwx3w at public.gmane.org
Sun Mar 21 19:25:10 UTC 2010


It could be a problem in the connector, maybe a loose solder point?
I'd try another port and another cable before anything else.

FZ

On Sun, Mar 21, 2010 at 14:02, Thomas Milne
<tbrucemilne-TcoXwbchSccMMYnvST3LeUB+6BGkLq7r at public.gmane.org> wrote:
> I'm starting to get worried....
>
> Today I shut down my computer to get the dust out, and when I booted
> back up, my big external drive would not mount (panic), so again I
> looked at /var/log/messages to see what I could see. Eventually it did
> mount (whew!), but this is what I saw in messages:
>
> Mar 21 13:50:24 node1 kernel: [  575.712023] usb 1-4: reset high speed
> USB device using ehci_hcd and address 8
> Mar 21 13:50:25 node1 kernel: [  575.964035] usb 1-4: reset high speed
> USB device using ehci_hcd and address 8
> Mar 21 13:50:25 node1 kernel: [  576.216035] usb 1-4: reset high speed
> USB device using ehci_hcd and address 8
> Mar 21 13:50:25 node1 kernel: [  576.468060] usb 1-4: reset high speed
> USB device using ehci_hcd and address 8
> Mar 21 13:50:25 node1 kernel: [  576.720025] usb 1-4: reset high speed
> USB device using ehci_hcd and address 8
> Mar 21 13:50:26 node1 kernel: [  576.972022] usb 1-4: reset high speed
> USB device using ehci_hcd and address 8
> Mar 21 13:50:26 node1 kernel: [  577.105760] sd 2:0:0:0: [sda]
> Unhandled error code
> Mar 21 13:50:26 node1 kernel: [  577.105768] sd 2:0:0:0: [sda] Result:
> hostbyte=DID_ERROR driverbyte=DRIVER_OK
> Mar 21 13:50:26 node1 kernel: [  577.224088] usb 1-4: reset high speed
> USB device using ehci_hcd and address 8
> Mar 21 13:50:26 node1 kernel: [  577.476054] usb 1-4: reset high speed
> USB device using ehci_hcd and address 8
> Mar 21 13:50:26 node1 kernel: [  577.728028] usb 1-4: reset high speed
> USB device using ehci_hcd and address 8
> Mar 21 13:50:27 node1 kernel: [  577.980018] usb 1-4: reset high speed
> USB device using ehci_hcd and address 8
> Mar 21 13:50:27 node1 kernel: [  578.232023] usb 1-4: reset high speed
> USB device using ehci_hcd and address 8
> Mar 21 13:50:27 node1 kernel: [  578.484018] usb 1-4: reset high speed
> USB device using ehci_hcd and address 8
> Mar 21 13:50:27 node1 kernel: [  578.617702] sd 2:0:0:0: [sda]
> Unhandled error code
> Mar 21 13:50:27 node1 kernel: [  578.617710] sd 2:0:0:0: [sda] Result:
> hostbyte=DID_ERROR driverbyte=DRIVER_OK
> Mar 21 13:50:27 node1 kernel: [  578.736021] usb 1-4: reset high speed
> USB device using ehci_hcd and address 8
> Mar 21 13:50:28 node1 kernel: [  578.988026] usb 1-4: reset high speed
> USB device using ehci_hcd and address 8
> Mar 21 13:50:28 node1 kernel: [  579.240018] usb 1-4: reset high speed
> USB device using ehci_hcd and address 8
> Mar 21 13:50:28 node1 kernel: [  579.492018] usb 1-4: reset high speed
> USB device using ehci_hcd and address 8
> Mar 21 13:50:28 node1 kernel: [  579.744118] usb 1-4: reset high speed
> USB device using ehci_hcd and address 8
> Mar 21 13:50:29 node1 kernel: [  579.996022] usb 1-4: reset high speed
> USB device using ehci_hcd and address 8
> Mar 21 13:50:29 node1 kernel: [  580.129748] sd 2:0:0:0: [sda]
> Unhandled error code
> Mar 21 13:50:29 node1 kernel: [  580.129754] sd 2:0:0:0: [sda] Result:
> hostbyte=DID_ERROR driverbyte=DRIVER_OK
> Mar 21 13:51:32 node1 kernel: [  643.279973] usb 1-4: USB disconnect, address 8
> Mar 21 13:51:32 node1 kernel: [  643.552060] usb 1-4: new high speed
> USB device using ehci_hcd and address 13
> Mar 21 13:51:33 node1 kernel: [  643.888030] usb 3-2: new full speed
> USB device using uhci_hcd and address 2
> Mar 21 13:51:33 node1 kernel: [  644.031972] usb 3-2: not running at
> top speed; connect to a high speed hub
> Mar 21 13:51:33 node1 kernel: [  644.060004] usb 3-2: New USB device
> found, idVendor=04fc, idProduct=0c25
> Mar 21 13:51:33 node1 kernel: [  644.060035] usb 3-2: New USB device
> strings: Mfr=2, Product=3, SerialNumber=1
> Mar 21 13:51:33 node1 kernel: [  644.060040] usb 3-2: Product: USB to
> Serial-ATA bridge
> Mar 21 13:51:33 node1 kernel: [  644.060043] usb 3-2: Manufacturer:
> Sunplus Technology Co.,Ltd.
> Mar 21 13:51:33 node1 kernel: [  644.060046] usb 3-2: SerialNumber:
> FF310005280000000000009FF1B082
> Mar 21 13:51:33 node1 kernel: [  644.060189] usb 3-2: configuration #1
> chosen from 1 choice
> Mar 21 13:51:33 node1 kernel: [  644.082219] scsi4 : SCSI emulation
> for USB Mass Storage devices
> Mar 21 13:51:38 node1 kernel: [  649.090972] scsi 4:0:0:0:
> Direct-Access     ST310005 28AS                  PQ: 0 ANSI: 2
> Mar 21 13:51:38 node1 kernel: [  649.101954] sd 4:0:0:0: [sda]
> 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
> Mar 21 13:51:38 node1 kernel: [  649.106947] sd 4:0:0:0: [sda] Write
> Protect is off
> Mar 21 13:51:44 node1 kernel: [  649.122952]  sda: sda1
> Mar 21 13:51:44 node1 kernel: [  654.910936] sd 4:0:0:0: [sda]
> Attached SCSI disk
>
> Is there something wrong with my computer? I don't get this with my
> iPod when I plug it in, and now the USB key that was not working
> previously this week (see other USB thread) now is working, no errors
> in messages.
>
>
> --
> TBM
> --
> The Toronto Linux Users Group.      Meetings: http://gtalug.org/
> TLUG requests: Linux topics, No HTML, wrap text below 80 columns
> How to UNSUBSCRIBE: http://gtalug.org/wiki/Mailing_lists
>
--
The Toronto Linux Users Group.      Meetings: http://gtalug.org/
TLUG requests: Linux topics, No HTML, wrap text below 80 columns
How to UNSUBSCRIBE: http://gtalug.org/wiki/Mailing_lists





More information about the Legacy mailing list