computer won't power up

Madison Kelly linux-5ZoueyuiTZhBDgjK7y7TUQ at public.gmane.org
Thu Jan 22 20:54:29 UTC 2009


Madison Kelly wrote:
> Unplug everything from the PSU except say an optical drive (or an old 
> hard drive you don't care about). This is because the PSU needs a load. 
> Next, find pin 13 on the main header; This is usually the sole green 
> wire, often a smaller gage then the rest. Short this to ground. Now flip 
> the switch on the back of the PSU to connect the mains and see if it 
> powers up. If it does, your problem is not the PSU. If it doesn't, the 
> PSU is dead.
> 
> Pin 13 is the Power Good Line, this is normally shorted to ground by the 
> system board/CPU when the initial ripple in line voltage has settled to 
> protect the rest of the devices from damage. Hence why you don't want 
> anything sensitive plugged in while doing this test.
> 
> Madi

Looks like I meant pin 14. :(

http://pinouts.ru/Power/atxpower_pinout.shtml

Madi
--
The Toronto Linux Users Group.      Meetings: http://gtalug.org/
TLUG requests: Linux topics, No HTML, wrap text below 80 columns
How to UNSUBSCRIBE: http://gtalug.org/wiki/Mailing_lists





More information about the Legacy mailing list