DLink DIR-625 Router

[James Knott]

Dave Germiquet wrote:
> You can also try this:
>
> Click On Manual Configuration from the log in page
> Click on wireless settings
> make sure you have a unique ssid
> make sure the enable wireless option is enable
> try making enable auto scan is enabled
>
> If you don't have a DHCP server, i'd try enabling that , and making
> its propery configured.
> I'm not too sure how wireless works without a DHCP server...also make
> sure the dhcp server doesnt automatically set it to an ip address that
> is already taken.
> (Use the dhcp range).
>
>   

As I mentioned in another note, just setting to factory default should
produce a usable signal, with no encryption and also with DHCP enabled. 
However, as I understand it, the issue is seeing the signal, not getting
an IP address.

-- 
Use OpenOffice.org <http://www.openoffice.org>
--
The Toronto Linux Users Group.      Meetings: http://gtalug.org/
TLUG requests: Linux topics, No HTML, wrap text below 80 columns
How to UNSUBSCRIBE: http://gtalug.org/wiki/Mailing_lists