no SATA

Mon Apr 6 19:30:44 UTC 2009

On Mon, Apr 6, 2009 at 1:59 PM, Lennart Sorensen
<lsorense-1wCw9BSqJbv44Nm34jS7GywD8/FfD2ys at public.gmane.org> wrote:
> On Mon, Apr 06, 2009 at 01:55:55PM -0400, edward chin wrote:
>> I've been using ubuntu 8.10 with good sucess for several months
>> on an Asus K8N board with an AMD 64 bit 3300 cpu + 1.0 gig ram.
>>
>> I put in a SATA 500gig HDD, but the system isn't recognizing
>> the drive. I enabled SATA it in the bios and set pnp OS to off.
>> I tried enabling/disabling raid with no sucess.
>>
>> (the SATA drive worked in a windows box)
>>
>> Any ideas?
>
> Which kernel version?  What does dmesg say?  What about lspci?
>


I can't get wine to run lspci

kernel is 2.6.27-11-generic

dmesg relating to SATA is below:

[    4.123123] sata_nv 0000:00:0a.0: version 3.5
[    4.123140] sata_nv 0000:00:0a.0: PCI INT A -> Link[LTID] -> GSI 21
(level, low) -> IRQ 21
[    4.123185] sata_nv 0000:00:0a.0: setting latency timer to 64
[    4.125621] scsi2 : sata_nv
[    4.131594] scsi3 : sata_nv
[    4.132530] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xc800 irq 21
[    4.132533] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xc808 irq 21
[    4.135567] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    4.135602] scsi 0:0:1:0: Attached scsi generic sg1 type 0
[    4.135642] scsi 1:0:0:0: Attached scsi generic sg2 type 5
[    4.146326] usb 1-2: configuration #1 chosen from 1 choice
[    4.162330] Driver 'sd' needs updating - please use bus_type methods
[    4.162468] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    4.162483] sd 0:0:0:0: [sda] Write Protect is off
[    4.162485] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.162505] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[    4.162568] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    4.162579] sd 0:0:0:0: [sda] Write Protect is off
[    4.162581] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.162600] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[    4.162604]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[    4.187163]  sda1 sda2 <<6>usbcore: registered new interface driver hiddev
[    4.198535] input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/input/input2
[    4.201626]  sda5<6>input,hidraw0: USB HID v1.10 Mouse [Logitech
USB-PS/2 Optical Mouse] on usb-0000:00:02.0-2
[    4.208238] usbcore: registered new interface driver usbhid
[    4.208242] usbhid: v2.6:USB HID core driver
[    4.209349]  sda6 sda7 sda8 sda9 sda10 >
[    4.264338] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.268564] sd 0:0:1:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[    4.268583] sd 0:0:1:0: [sdb] Write Protect is off
[    4.268585] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    4.268606] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[    4.268709] sd 0:0:1:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[    4.268720] sd 0:0:1:0: [sdb] Write Protect is off
[    4.268723] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    4.268741] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[    4.268746]  sdb: sdb1 sdb2 < sdb5 sdb6 >
[    4.296070] sd 0:0:1:0: [sdb] Attached SCSI disk
[    4.304111] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw
xa/form2 cdda tray
[    4.304117] Uniform CD-ROM driver Revision: 3.20
[    4.304237] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   10.052010] ata3: link is slow to respond, please be patient (ready=0)
[   14.140014] ata3: SRST failed (errno=-16)
[   14.140026] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   14.140032] ata3: link online but device misclassified, retrying
[   20.060013] ata3: link is slow to respond, please be patient (ready=0)
[   24.148010] ata3: SRST failed (errno=-16)
[   24.148022] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   24.148028] ata3: link online but device misclassified, retrying
[   30.068010] ata3: link is slow to respond, please be patient (ready=0)
[   59.188011] ata3: SRST failed (errno=-16)
[   59.188083] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   59.188089] ata3: link online but device misclassified, retrying
[   59.188092] ata3: limiting SATA link speed to 1.5 Gbps
[   64.212004] ata3: SRST failed (errno=-16)
[   64.212070] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   64.212074] ata3: link online but device misclassified, device
detection might fail
[   64.213050] ata3: exception Emask 0x10 SAct 0x0 SErr 0x19d0000
action 0xe frozen
[   64.213129] ata3: SError: { PHYRdyChg CommWake 10B8B Dispar LinkSeq
TrStaTrns }
[   64.213208] ata3: hard resetting link
[   64.936009] ata4: SATA link down (SStatus 0 SControl 300)
[   70.164007] ata3: link is slow to respond, please be patient (ready=0)
[   74.252005] ata3: SRST failed (errno=-16)
[   74.252075] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   74.252081] ata3: link online but device misclassified, retrying
[   74.252084] ata3: hard resetting link
[   80.172005] ata3: link is slow to respond, please be patient (ready=0)
[   81.510919] PM: Starting manual resume from disk
[   81.510925] PM: Resume from partition 8:10
[   81.510926] PM: Checking hibernation image.
[   81.511378] PM: Resume from disk failed.
[   81.555463] kjournald starting.  Commit interval 5 seconds
[   81.555483] EXT3-fs: mounted filesystem with ordered data mode.
[   84.260012] ata3: SRST failed (errno=-16)
[   84.260099] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   84.260104] ata3: link online but device misclassified, retrying
[   84.260108] ata3: hard resetting link
[   89.483229] udevd version 124 started
[   90.158099] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   90.168045] ACPI: Power Button (FF) [PWRF]
[   90.168214] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[   90.184034] ACPI: Power Button (CM) [PWRB]
[   90.188014] ata3: link is slow to respond, please be patient (ready=0)
[   90.252203] ACPI: I/O resource nForce2_smbus [0x5000-0x503f]
conflicts with ACPI region SMRG [0x5000-0x5004]
[   90.252207] ACPI: Device needs an ACPI driver
[   90.252256] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[   90.252281] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5040
[   90.931266] parport_pc 00:06: reported by Plug and Play ACPI
[   90.931308] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   90.933204] parport0: Printer, Brother HL-2040 series
[   91.205807] ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 20
[   91.205814] Intel ICH 0000:00:06.0: PCI INT A -> Link[LAUI] -> GSI
20 (level, low) -> IRQ 20
[   91.205839] Intel ICH 0000:00:06.0: setting latency timer to 64
[   91.528043] intel8x0_measure_ac97_clock: measured 54691 usecs
[   91.528048] intel8x0: clocking to 46878
[   91.531028] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   91.548293] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   92.961500] nvidia: module license 'NVIDIA' taints kernel.
[   92.963193] Symbol init_mm is marked as UNUSED, however this module
is using it.
[   92.963195] This symbol will go away in the future.
[   92.963197] Please evalute if this is the right api to use and if
it really is, submit a report the linux kernel mailinglist together
with submitting your code for inclusion.
[   93.225143] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   93.248330] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 19
[   93.248343] nvidia 0000:01:00.0: PCI INT A -> Link[LNKE] -> GSI 19
(level, low) -> IRQ 19
[   93.248647] NVRM: loading NVIDIA UNIX x86_64 Kernel Module
173.14.12  Thu Jul 17 18:10:24 PDT 2008
[   95.355294] lp0: using parport0 (interrupt-driven).
[   95.555423] Adding 1196800k swap on /dev/sda10.  Priority:-1
extents:1 across:1196800k
[  119.316016] ata3: SRST failed (errno=-16)
[  119.316090] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  119.316095] ata3: link online but device misclassified, retrying
[  119.316098] ata3: limiting SATA link speed to 1.5 Gbps
[  119.316100] ata3: hard resetting link
[  124.340016] ata3: SRST failed (errno=-16)
[  124.340088] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  124.340093] ata3: link online but device misclassified, device
detection might fail
[  124.340101] ata3: EH complete
[  124.341055] ata3: exception Emask 0x10 SAct 0x0 SErr 0x19d0000
action 0xe frozen
[  124.341134] ata3: SError: { PHYRdyChg CommWake 10B8B Dispar LinkSeq
TrStaTrns }
[  124.341216] ata3: hard resetting link
[  130.260010] ata3: link is slow to respond, please be patient (ready=0)
[  134.348010] ata3: SRST failed (errno=-16)
[  134.348084] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  134.348089] ata3: link online but device misclassified, retrying
[  134.348092] ata3: hard resetting link
[  140.268018] ata3: link is slow to respond, please be patient (ready=0)
[  144.356018] ata3: SRST failed (errno=-16)
[  144.356092] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  144.356097] ata3: link online but device misclassified, retrying
[  144.356100] ata3: hard resetting link
[  150.276018] ata3: link is slow to respond, please be patient (ready=0)
[  179.396012] ata3: SRST failed (errno=-16)
[  179.396085] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  179.396091] ata3: link online but device misclassified, retrying
[  179.396093] ata3: limiting SATA link speed to 1.5 Gbps
[  179.396096] ata3: hard resetting link
[  184.420011] ata3: SRST failed (errno=-16)
[  184.420084] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  184.420089] ata3: link online but device misclassified, device
detection might fail
[  184.420098] ata3: EH complete
[  184.421058] ata3: exception Emask 0x10 SAct 0x0 SErr 0x19d0000
action 0xe frozen
[  184.421137] ata3: SError: { PHYRdyChg CommWake 10B8B Dispar LinkSeq
TrStaTrns }
[  184.421219] ata3: hard resetting link
[  190.340012] ata3: link is slow to respond, please be patient (ready=0)
[  194.428011] ata3: SRST failed (errno=-16)
[  194.428085] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  194.428090] ata3: link online but device misclassified, retrying
[  194.428094] ata3: hard resetting link
[  200.348011] ata3: link is slow to respond, please be patient (ready=0)
[  204.436011] ata3: SRST failed (errno=-16)
[  204.436085] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  204.436090] ata3: link online but device misclassified, retrying
[  204.436093] ata3: hard resetting link
[  210.356014] ata3: link is slow to respond, please be patient (ready=0)
[  239.476014] ata3: SRST failed (errno=-16)
[  239.476087] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  239.476092] ata3: link online but device misclassified, retrying
[  239.476095] ata3: limiting SATA link speed to 1.5 Gbps
[  239.476097] ata3: hard resetting link
[  244.500012] ata3: SRST failed (errno=-16)
[  244.500085] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  244.500090] ata3: link online but device misclassified, device
detection might fail
[  244.500098] ata3: EH complete
[  244.501053] ata3: exception Emask 0x10 SAct 0x0 SErr 0x19d0000
action 0xe frozen
[  244.501141] ata3: SError: { PHYRdyChg CommWake 10B8B Dispar LinkSeq
TrStaTrns }
[  244.501224] ata3: hard resetting link
[  246.924789] EXT3 FS on sda9, internal journal
[  247.358345] type=1505 audit(1239018391.135:2):
operation="profile_load" name="/usr/share/gdm/guest-session/Xsession"
name2="default" pid=4172
[  247.419843] type=1505 audit(1239018391.195:3):
operation="profile_load" name="/usr/bin/freshclam" name2="default"
pid=4177
[  247.585744] type=1505 audit(1239018391.363:4):
operation="profile_load" name="/usr/lib/cups/backend/cups-pdf"
name2="default" pid=4181
[  247.585994] type=1505 audit(1239018391.363:5):
operation="profile_load" name="/usr/sbin/cupsd" name2="default"
pid=4181
[  247.653805] ip_tables: (C) 2000-2006 Netfilter Core Team


> --
> Len Sorensen
> --
> The Toronto Linux Users Group.      Meetings: http://gtalug.org/
> TLUG requests: Linux topics, No HTML, wrap text below 80 columns
> How to UNSUBSCRIBE: http://gtalug.org/wiki/Mailing_lists
>
--
The Toronto Linux Users Group.      Meetings: http://gtalug.org/
TLUG requests: Linux topics, No HTML, wrap text below 80 columns
How to UNSUBSCRIBE: http://gtalug.org/wiki/Mailing_lists