help
chris-n/jUll39koHNgV/OU4+dkA at public.gmane.org
chris-n/jUll39koHNgV/OU4+dkA at public.gmane.org
Thu Jan 31 01:50:42 UTC 2008
Dave Germiquet writes:
> Hey Guys,
>
> Just so you all know I'm not any linux expert, i'm still a newbie
> after many year :) But....
>
> Chris see if this helps you out:
>
> # cat /proc/interrupts
Looks like it has its own IRQ:
root at cpc:~# cat /proc/interrupts
CPU0
0: 292 IO-APIC-edge timer
1: 12181 IO-APIC-edge i8042
6: 5 IO-APIC-edge floppy
7: 0 IO-APIC-edge parport0
8: 3 IO-APIC-edge rtc
9: 1 IO-APIC-fasteoi acpi
12: 471474 IO-APIC-edge i8042
14: 158029 IO-APIC-edge libata
15: 134739 IO-APIC-edge libata
16: 70018 IO-APIC-fasteoi uhci_hcd:usb1
17: 29008 IO-APIC-fasteoi eth0
18: 3 IO-APIC-fasteoi ohci1394
19: 24487 IO-APIC-fasteoi EMU10K1
20: 0 IO-APIC-fasteoi Intel 82801BA-ICH2
NMI: 0
LOC: 1017170
ERR: 0
MIS: 0
root at cpc:~#
> I think thats what I used originally.
>
> You can also run
>
> # dmesg
<...>
[ 47.313984] emu1010: Special config.
[ 47.314103] emu1010: EMU_HANA_ID=0x7f
[ 47.486647]
/build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0:
USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4811
[ 47.486709] usbcore: registered new interface driver usblp
[ 47.486720]
/build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13:
USB Printer Device Class driver
[ 48.106570] firmware size=0x133a4
[ 50.500129] eth0: no IPv6 routers present
[ 51.196134] emu1010: Hana Firmware loaded
[ 51.196185] Hana ver:3.4
[ 51.196245] emu1010: Card options=0x1
[ 51.196272] emu1010: Card options=0x1
[ 51.196758] emu1010: Card options3=0x1
[ 51.314247] EMU outputs on
[ 51.314263] EMU inputs on
<...>
> To see if the kernel is failing when loading any of your sound card drivers.
>
> I'll just shut up now.
:)
Chris
--
The Toronto Linux Users Group. Meetings: http://gtalug.org/
TLUG requests: Linux topics, No HTML, wrap text below 80 columns
How to UNSUBSCRIBE: http://gtalug.org/wiki/Mailing_lists
More information about the Legacy
mailing list