help

[Lennart Sorensen]

On Wed, Jan 30, 2008 at 02:23:49PM -0500, chris-n/jUll39koHNgV/OU4+dkA at public.gmane.org wrote:
> Another reason an IRQ conflict seems unlikely is that the part of the card 
> (it has two cards) that I am plugging into to record (without success) is 
> the same part of the card (i.e. same slot) that plays back (successfully). 

I believe the way the emu1212m works is that the primary card does
playback, and then the second card does capture.  Unfortunately the
second card only works when it's firmware file has been loaded, while
the primary card is just a plain emu10k1 (in as much as that DSP can be
considered plain) which always works.  So if the driver still says it
fails to load firmware, then the second card isn't going to do anything
at all.

The main card is after all the same card used by a number of emu
products, with different features.  Some use an external box, some use
an internal add in card.  Each uses different firmware loaded into the
add on device to control what it does, and the main card then talks to
the add in card to use those extra features.

--
Len Sorensen
--
The Toronto Linux Users Group.      Meetings: http://gtalug.org/
TLUG requests: Linux topics, No HTML, wrap text below 80 columns
How to UNSUBSCRIBE: http://gtalug.org/wiki/Mailing_lists