semi-pro PCI snd crd for linux

[Tyler Aviss]

How about the output from "lspci" or "cat /proc/pci"

On my SBLive, which is non-audigy, I use the emu10k1 driver, so I'm
not sure about the differences between the two cards.

On 9/2/07, Chris Aitken <chris-n/jUll39koHNgV/OU4+dkA at public.gmane.org> wrote:
> tleslie wrote:
> > does this card have a toslink fiber optics output?
> > go into  alsamixer  make sure the needed volume leves are above 0,
> > sometime they start at 0 by default, and there is Master, PCM, etc
> >
> > i have had issues with sound cards, like:
> > 1) had to run yast and reinstall it via yast every reboot so it worked
> >       (but since machine stays up 24/7 this wasnt a issue),
> > 2) had to switch to another method other then ALAS to get working.
> > 3) had to install new alsa,
> >
> > if the card is "detected" by linux, and in alsa's compat. charts it
> > gives it reference of basic workability, it 99.999% likel to work.
> >
> > check your dmesg and /var/log/messages for issues around module load.
> >
> cat /var/log/messages has stuff that looks lie dmesg, but here's the emu
> stuff from cat /var/log/messages:
>
> Sep  2 16:06:59 p733 kernel: emu1010: Special config.
> Sep  2 16:06:59 p733 kernel: emu1010: EMU_HANA_ID=0x7f
> Sep  2 16:06:59 p733 kernel: firmware: emu/hana.fw not found. Err=-2
> Sep  2 16:06:59 p733 kernel: emu1010: Loading Hana Firmware file
> emu/hana.fw failed
> Sep  2 16:06:59 p733 kernel: ACPI: PCI interrupt for device 0000:02:0a.0
> disabled
> Sep  2 16:06:59 p733 kernel: EMU10K1_Audigy: probe of 0000:02:0a.0
> failed with error -2
>
> <snip>
> --
> The Toronto Linux Users Group.      Meetings: http://gtalug.org/
> TLUG requests: Linux topics, No HTML, wrap text below 80 columns
> How to UNSUBSCRIBE: http://gtalug.org/wiki/Mailing_lists
>
--
The Toronto Linux Users Group.      Meetings: http://gtalug.org/
TLUG requests: Linux topics, No HTML, wrap text below 80 columns
How to UNSUBSCRIBE: http://gtalug.org/wiki/Mailing_lists