semi-pro PCI snd crd for linux
Chris Aitken
chris-n/jUll39koHNgV/OU4+dkA at public.gmane.org
Sun Sep 2 20:45:54 UTC 2007
tleslie wrote:
> does this card have a toslink fiber optics output?
> go into alsamixer make sure the needed volume leves are above 0,
> sometime they start at 0 by default, and there is Master, PCM, etc
>
> i have had issues with sound cards, like:
> 1) had to run yast and reinstall it via yast every reboot so it worked
> (but since machine stays up 24/7 this wasnt a issue),
> 2) had to switch to another method other then ALAS to get working.
> 3) had to install new alsa,
>
> if the card is "detected" by linux, and in alsa's compat. charts it
> gives it reference of basic workability, it 99.999% likel to work.
>
> check your dmesg
[chris at p733 ~]$ dmesg
Linux version 2.6.22.4-65.fc7
(kojibuilder-fbpyxXtnJUxHcw7WmXvZTaw4yJhunYrG28t4la5Gatg at public.gmane.org) (gcc version 4.1.2 20070502
(Red Hat 4.1.2-12)) #1 SMP Tue Aug 21 22:36:56 EDT 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017ed0000 (usable)
BIOS-e820: 0000000017ed0000 - 0000000017ef0000 (ACPI NVS)
BIOS-e820: 0000000017ef0000 - 0000000017f00000 (usable)
BIOS-e820: 00000000feea0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
383MB LOWMEM available.
found SMP MP-table at 000f9bc0
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 98048) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 98048
HighMem 98048 -> 98048
early_node_map[1] active PFN ranges
0: 0 -> 98048
On node 0 totalpages: 98048
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 734 pages used for memmap
Normal zone: 93218 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000E0010, 0014 (r0 COMPAQ)
ACPI: RSDT 000E0080, 0054 (r1 COMPAQ CPQ0005 20000618 0)
ACPI: FACP 000E00F0, 0074 (r1 COMPAQ SOLANO 1 0)
ACPI: DSDT 000E01C4, 1077 (r1 COMPAQ DSDT 1 MSFT 100000D)
ACPI: FACS 000E0040, 0040
ACPI: SSDT 000E123B, 00CA (r1 COMPAQ CORE_UTL 1 MSFT 100000D)
ACPI: SSDT 000E1305, 0E81 (r1 COMPAQ VILLTBL1 1 MSFT 100000D)
ACPI: APIC 000E0164, 0060 (r1 COMPAQ SOLANO 1 0)
ACPI: SSDT 000E2186, 06AD (r1 COMPAQ PNP_PRSS 1 MSFT 100000D)
ACPI: SSDT 000E289E, 018D (r1 COMPAQ S3 1 MSFT 100000D)
ACPI: SSDT 000E3083, 00AF (r1 COMPAQ PME 1 MSFT 100000D)
ACPI: SSDT 000E2A2B, 0132 (r1 COMPAQ PIDETM 1 MSFT 100000D)
ACPI: SSDT 000E2C8F, 00FD (r1 COMPAQ GTF0 1 MSFT 100000D)
ACPI: SSDT 000E2D8C, 00FD (r1 COMPAQ GTF1 1 MSFT 100000D)
ACPI: SSDT 000E2B5D, 0132 (r1 COMPAQ SIDETM 1 MSFT 100000D)
ACPI: SSDT 000E2F86, 00FD (r1 COMPAQ GTF3 1 MSFT 100000D)
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 17f00000:e6fa0000)
Built 1 zonelists. Total pages: 97282
Kernel command line: ro root=LABEL=/ rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0791000 soft=c0771000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 730.917 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 379984k/392192k available (2106k kernel code, 11344k reserved,
1114k data, 260k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffc56000 - 0xfffff000 (3748 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd8800000 - 0xff7fe000 ( 623 MB)
lowmem : 0xc0000000 - 0xd7f00000 ( 383 MB)
.init : 0xc072b000 - 0xc076c000 ( 260 kB)
.data : 0xc060ea2e - 0xc0725504 (1114 kB)
.text : 0xc0400000 - 0xc060ea2e (2106 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 1462.62 BogoMIPS
(lpj=731311)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000
00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20070126
CPU0: Intel Pentium III (Coppermine) stepping 03
Total of 1 processors activated (1462.62 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=1536 bytes
Time: 16:06:14 Date: 08/02/107
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xe838d, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region fa00-fa3f claimed by ICH4 GPIO
PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0e: ioport range 0x400-0x41f has been reserved
pnp: 00:0e: ioport range 0x420-0x43f has been reserved
pnp: 00:0e: ioport range 0x440-0x45f has been reserved
pnp: 00:0e: ioport range 0x460-0x47f has been reserved
pnp: 00:0e: ioport range 0xf800-0xf81f has been reserved
pnp: 00:0e: ioport range 0xf820-0xf83f has been reserved
pnp: 00:0e: ioport range 0xf840-0xf85f has been reserved
pnp: 00:0e: ioport range 0xf860-0xf87f has been reserved
pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0f: iomem range 0x100000-0x17efffff could not be reserved
pnp: 00:0f: iomem range 0xfff80000-0xffffffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:1e.0
IO window: 1000-1fff
MEM window: 40000000-404fffff
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 196608 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs... it is
Switched to high resolution mode on CPU 0
Freeing initrd memory: 3486k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1188749175.405:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 38B1F6ECF739D0D
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports 8 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Generic RTC Driver v1.07
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel i815 Chipset.
agpgart: detected 4MB dedicated video ram.
agpgart: AGP aperture is 64M @ 0x44000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Magic number: 7:927:134
hash matches device device:09
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Freeing unused kernel memory: 260k freed
Write protecting the kernel read-only data: 862k
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: UHCI Host Controller
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.4: irq 16, io base 0x00002440
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
input: PS2++ Logitech Wheel Mouse as /class/input/input2
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
SCSI subsystem initialized
usb 1-1: new full speed USB device using uhci_hcd and address 2
libata version 2.21 loaded.
ata_piix 0000:00:1f.1: version 2.11
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00012460
irq 14
ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00012468
irq 15
usb 1-1: configuration #1 chosen from 1 choice
ata1.00: ATA-5: QUANTUM FIREBALLP AS20.5, A1Y.1500, max UDMA/100
ata1.00: 40132503 sectors, multi 16: LBA
ata1.01: ATA-4: WDC WD100BA, 16.13M16, max UDMA/66
ata1.01: 19541088 sectors, multi 16: LBA
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.01: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
ata1.01: configured for UDMA/33
ata2.01: ATAPI: HL-DT-STDVD-RAM GSA-H54N, 1.00, max UDMA/66
ata2.01: limited to UDMA/33 due to 40-wire cable
ata2.01: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA QUANTUM FIREBALL A1Y. PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 40132503 512-byte hardware sectors (20548 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 40132503 512-byte hardware sectors (20548 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 0:0:1:0: Direct-Access ATA WDC WD100BA 16.1 PQ: 0 ANSI: 5
sd 0:0:1:0: [sdb] 19541088 512-byte hardware sectors (10005 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:1:0: [sdb] 19541088 512-byte hardware sectors (10005 MB)
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdb:
sd 0:0:1:0: [sdb] Attached SCSI disk
scsi 1:0:1:0: CD-ROM HL-DT-ST DVD-RAM GSA-H54N 1.00 PQ: 0 ANSI: 5
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
dm-devel-H+wXaHxf7aLQT0dZR+AlfA at public.gmane.org
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 6 roles, 1832 types, 81 bools, 1 sens, 1024 cats
security: 61 classes, 68707 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses
genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1188749181.630:2): policy loaded auid=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
scsi 1:0:1:0: Attached scsi generic sg2 type 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0xf860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
Intel 82802 RNG detected
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1
alt 0 proto 2 vid 0x03F0 pid 0x4811
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
i810_smbus 0000:00:02.0: i810/i815 i2c device found.
e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 17
e100: eth0: e100_probe: addr 0x40100000, irq 17, MAC addr 00:50:8B:D8:76:CD
ACPI: PCI Interrupt 0000:02:0a.2[B] -> GSI 22 (level, low) -> IRQ 18
firewire_ohci: Added fw-ohci device 0000:02:0a.2, OHCI version 1.10
ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 21 (level, low) -> IRQ 19
emu1010: Special config.
emu1010: EMU_HANA_ID=0x7f
firmware: emu/hana.fw not found. Err=-2
emu1010: Loading Hana Firmware file emu/hana.fw failed
ACPI: PCI interrupt for device 0000:02:0a.0 disabled
EMU10K1_Audigy: probe of 0000:02:0a.0 failed with error -2
firewire_core: created new fw device fw0 (0 config rom retries)
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 50901 usecs
intel8x0: clocking to 41149
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access HP PSC 1610 1.00 PQ: 0 ANSI: 2
sd 2:0:0:0: [sdc] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg3 type 0
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 21
No dock devices found.
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PBTN]
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda2, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 786424k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
across:786424k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
genfs_contexts
IA-32 Microcode Update Driver: v1.14a <tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/FLrbF6 at public.gmane.org>
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (3064 buckets, 24512 max)
audit(1188763617.154:3): audit_pid=1444 old=0 by auid=4294967295
subj=system_u:system_r:auditd_t:s0
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
lp0: using parport0 (interrupt-driven).
lp0: console ready
eth0: no IPv6 routers present
[chris at p733 ~]$ dmesg
<snip>
--
The Toronto Linux Users Group. Meetings: http://gtalug.org/
TLUG requests: Linux topics, No HTML, wrap text below 80 columns
How to UNSUBSCRIBE: http://gtalug.org/wiki/Mailing_lists
More information about the Legacy
mailing list