iPod Nano

Chris Aitken chris-n/jUll39koHNgV/OU4+dkA at public.gmane.org
Tue Nov 6 23:32:54 UTC 2007 

Craig Routledge wrote:
> On 2007-11-06 15:43, Chris Aitken wrote:
>   
>> Still getting 'permission denied':
>>
>>  [chris at p733 libgpod]$ sh ./autogen.sh
>>     
>
> If you ran any of the scripts or makefiles (other than "make install") as 
> root, there will still be some files left over that are owned by root.  
> Either recursively chown everything in the package directories back to your 
> normal user, or just start over by deleting the directories and un-tarring 
> the package again.
>   
Okay, I ran chmod 777 -R /home/chris/libgpod (I'm not versed in chown). 
THen I ran ./autogen.sh

It's telling me to run make now, but the output of autogen seems rife 
with errors? Should I run make or address the errors?

[chris at p733 libgpod]$ ./autogen.sh
checking for autoconf >= 2.53...
  testing autoconf2.50... not found.
  testing autoconf... found 2.61
checking for automake >= 1.7...
  testing automake-1.10... found 1.10
checking for libtool >= 1.4.3...
  testing libtoolize... found 1.5.22
checking for glib-gettext >= 2.2.0...
  testing glib-gettextize... found 2.12.13
checking for intltool >= 0.25...
  testing intltoolize... found 0.35.5
checking for pkg-config >= 0.14.0...
  testing pkg-config... found 0.21
checking for gtk-doc >= 1.0...
  testing gtkdocize... found 1.8
Checking for required M4 macros...
Checking for forbidden M4 macros...
Processing ./configure.ac
Running libtoolize...
Running glib-gettextize... Ignore non-fatal messages.
Copying file mkinstalldirs
Copying file po/Makefile.in.in

Please add the files
  codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4
  progtest.m4
from the /usr/share/aclocal directory to your autoconf macro directory
or directly to your aclocal.m4 file.
You will also need config.guess and config.sub, which you can get from
ftp://ftp.gnu.org/pub/gnu/config/.

Running intltoolize...
Running gtkdocize...
Running aclocal-1.10...
Running autoconf...
Running autoheader...
Running automake-1.10...
tests/Makefile.am:10: compiling `test-photos.c' with per-target flags 
requires `AM_PROG_CC_C_O' in `configure.ac'
Running ./configure --enable-maintainer-mode --enable-gtk-doc ...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking for a sed that does not truncate output... /bin/sed
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... gfortran
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether gfortran accepts -g... yes
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared 
libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared 
libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared 
libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for gfortran option to produce PIC... -fPIC
checking if gfortran PIC flag -fPIC works... yes
checking if gfortran static flag -static works... yes
checking if gfortran supports -c -o file.o... yes
checking whether the gfortran linker (/usr/bin/ld) supports shared 
libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether ln -s works... yes
checking whether make sets $(MAKE)... (cached) yes
checking for intltool >= 0.21... 0.35.5 found
checking for perl... /usr/bin/perl
checking for XML::Parser... ok
checking for iconv... /usr/bin/iconv
checking for msgfmt... /usr/bin/msgfmt
checking for msgmerge... /usr/bin/msgmerge
checking for xgettext... /usr/bin/xgettext
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for LIBGPOD... yes
checking for sg_ll_inquiry in -lsgutils... no
checking for TAGLIB... no
checking for GDKPIXBUF... no
checking for PYGOBJECT... no
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for LC_MESSAGES... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking for ngettext in libc... yes
checking for dgettext in libc... yes
checking for bind_textdomain_codeset... yes
checking for msgfmt... /usr/bin/msgfmt
checking for dcgettext... yes
checking if msgfmt accepts -c... yes
checking for gmsgfmt... /usr/bin/msgfmt
checking for xgettext... /usr/bin/xgettext
checking for catalogs to be installed...  de es fr he it ja ro sv
checking gtk-doc version >= 1.0... yes
checking whether to build python bindings... yes
checking for python... /usr/bin/python
checking whether /usr/bin/python version >= 2.1.1... yes
checking for /usr/bin/python version... 2.5
checking for /usr/bin/python platform... linux2
checking for /usr/bin/python script directory... 
${prefix}/lib/python2.5/site-packages
checking for /usr/bin/python extension module directory... 
${exec_prefix}/lib/python2.5/site-packages
checking for python development headers... found
checking for python module mutagen >= 1.8... no
checking for more warnings... yes
checking whether gcc understands -Wno-strict-aliasing... yes
checking whether gcc understands -Wno-sign-compare... yes
checking whether gcc understands -Wdeclaration-after-statement... yes
configure: creating ./config.status
chmod: changing permissions of `./config.status': Operation not permitted
config.status: creating Makefile
config.status: creating bindings/Makefile
config.status: creating bindings/python/gpod.i
config.status: creating bindings/python/Makefile
config.status: creating bindings/python/examples/Makefile
config.status: creating bindings/python/tests/Makefile
config.status: creating docs/Makefile
config.status: creating docs/reference/Makefile
config.status: creating docs/reference/version.xml
config.status: creating m4/Makefile
config.status: creating po/Makefile.in
config.status: creating src/Makefile
config.status: creating tools/Makefile
config.status: creating tests/Makefile
config.status: creating libgpod-1.0.pc
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
config.status: executing intltool commands
chmod: changing permissions of `intltool-extract': Operation not permitted
chmod: changing permissions of `intltool-extract': Operation not permitted
chmod: changing permissions of `intltool-update': Operation not permitted
chmod: changing permissions of `intltool-update': Operation not permitted
config.status: executing default-1 commands
config.status: executing po/stamp-it commands

Configuration for libgpod 0.5.3SVN :
--------------------------------

 Host System Type .....: i686-pc-linux-gnu
 Install path .........: /usr/local
 Preprocessor .........: gcc
 Compiler .............: gcc    -Wall   -Wchar-subscripts 
-Wmissing-declarations -Wmissing-prototypes   -Wnested-externs 
-Wpointer-arith     -Wcast-align -Wsign-compare     -Werror 
-std=c89        -g -O2 -Wno-strict-aliasing -Wno-sign-compare 
-Wdeclaration-after-statement -I/usr/include/glib-2.0 
-I/usr/lib/glib-2.0/include   -Wall 
 Linker ...............: gcc   -lgobject-2.0 -lglib-2.0   
 ArtworkDB support ....: no
 Python bindings ......: no
 PyGObject support ....: no

 Now type 'make' to build libgpod 0.5.3SVN,
 and then 'make install' for installation.

Now type `make' to compile libgpod

>
> --
> The Toronto Linux Users Group.      Meetings: http://gtalug.org/
> TLUG requests: Linux topics, No HTML, wrap text below 80 columns
> How to UNSUBSCRIBE: http://gtalug.org/wiki/Mailing_lists
>
>
>   

--
The Toronto Linux Users Group.      Meetings: http://gtalug.org/
TLUG requests: Linux topics, No HTML, wrap text below 80 columns
How to UNSUBSCRIBE: http://gtalug.org/wiki/Mailing_lists

More information about the Legacy mailing list