Bytecc 2.5" External Drive Enclosure - bus power supplies enough juice?

[Lennart Sorensen]

On Wed, Mar 08, 2006 at 01:07:48PM -0500, Madison Kelly wrote:
> IIRC, Bytecc use a horrible chip which often locks up hard when you 
> start a transfer of any decent size. I can't think of the chipset off 
> the top of my head though, sorry. My personal opinion is to stay *far* 
> away from Bytecc... they're cheap for a reason.
> 
> On the other hand, I have had good luck with Vantec's line, though I 
> have only used their 3.5" carriers. Generally speaking though; any 
> carrier that draws power from the USB bus will need ~500mA which is more 
> than the spec allows (350mA/channel). To get around this they generally 
> give you a USB pass-through cable that provides extra power for the 
> drive. These pass-throughs should only be put in between low-power or 
> self-powered USB devices (ie: a mouse).
> 
> The real test is to look at the power draw on the hard drive you want to 
> use and add ~20/30mA for the controller. Then see if one or two ports 
> will provide enough power for you.

I thought USB 2.0 increased the power limit over what USB 1.1 allowed.
I have certainly read of needing the extra cable on USB 1.1 systems
while not needing it on USB 2.0 systems.

Len Sorensen
--
The Toronto Linux Users Group.      Meetings: http://tlug.ss.org
TLUG requests: Linux topics, No HTML, wrap text below 80 columns
How to UNSUBSCRIBE: http://tlug.ss.org/subscribe.shtml