WD200 200gig HD for Dell Server

[James Mendez]

Hello Adil
I should have been more specific.
I have a 200gig Western Digital (EDIE?) that I want to physically install in
to the Dell Server.
Thats the easy part.
The hard part is what do at the install level.
I already have 2 Raid drives and I want this for more space.
After Installing, I start up the system. In the configuration this is where
I get lost.....
 
thanks
James

  _____  

From: owner-tlug-lxSQFCZeNF4 at public.gmane.org [mailto:owner-tlug-lxSQFCZeNF4 at public.gmane.org] On Behalf Of Adil Kodian
Sent: Friday, February 04, 2005 7:54 PM
To: tlug-lxSQFCZeNF4 at public.gmane.org
Subject: RE: [TLUG]: WD200 200gig HD for Dell Server


by backup if you mean hw raid - then yeah - you have to set stuff up prior
to boot using bios.
software raid, or even manual rsync like backup mechanisms dont need much
change. If your drive is recognized by bios then youre pretty much
guaranteed that it will work with linux. 
 
If its a PATA drive then it will simply appear as /dev/hda,b,c,d as the case
may be. you can then login as root, use fdisk to create partitions, use mkfs
to create a file system, use mount to mount it and then you can add the
entry to fstab for auto-mount. SATA or SCSI drives will simply be
/dev/sda,b,c,d. SCSI drives may require you to do more- but i guess youre
not looking at SCSI because you mentioned that it is a 200G hard drive. 
 

-----Original Message-----
From: owner-tlug-lxSQFCZeNF4 at public.gmane.org [mailto:owner-tlug-lxSQFCZeNF4 at public.gmane.org]On Behalf Of James Mendez
Sent: Friday, February 04, 2005 5:35 PM
To: tlug-lxSQFCZeNF4 at public.gmane.org
Subject: [TLUG]: WD200 200gig HD for Dell Server


Hello there
 
I am looking for advise to install this drive as a backup unit to a Dell
Poweredge 1600SC server.
The server runs on Redhat linux 9.
I am looking for help on the following:
The drive is brand new in a sealed case.
When I attach the drive, Do I have to set up the configuration setup before
Linux runs
Will I have to Mount the drive and format it
 
thanks
James

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://gtalug.org/pipermail/legacy/attachments/20050204/46ebf25b/attachment.html>