Problem with nvidia installer
John Myshrall
jmyshrall-6duGhz7i8susTnJN9+BGXg at public.gmane.org
Fri Sep 3 16:21:33 UTC 2004
On Fri, 3 Sep 2004 09:11:44 -0400
lsorense-1wCw9BSqJbv44Nm34jS7GywD8/FfD2ys at public.gmane.org (Lennart Sorensen) wrote:
> On Fri, Sep 03, 2004 at 03:48:38AM -0400, John Myshrall wrote:
> > On Thu, 2 Sep 2004 15:42:27 -0400
> > lsorense-1wCw9BSqJbv44Nm34jS7GywD8/FfD2ys at public.gmane.org (Lennart Sorensen) wrote:
> >
> > > On Thu, Sep 02, 2004 at 02:41:48PM -0400, jim ruxton wrote:
> > > > Thanks Lennart,
> > > > I got rid of a lot of errors by putting
> > > > Load "fb"
> > > > in my XF86Config file . Now I'm left with the following errors. Is it
> > > > possible to see your XF86Config file?
> >
> > <snip>
> >
> > > >
> > > >
> > > # cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
> > > # md5sum /etc/X11/XF86Config-4 > /var/lib/xfree86/XF86Config-4.md5sum
> > > # dpkg-reconfigure xserver-xfree86
> > > Section "Files"
> > > FontPath "unix/:7100" # local font server
> > > # if the local font server has problems, we can fall back on these
> > > FontPath "/usr/lib/X11/fonts/misc"
> > > FontPath "/usr/lib/X11/fonts/cyrillic"
> > > FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
> > > FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
> > > FontPath "/usr/lib/X11/fonts/Type1"
> > > FontPath "/usr/lib/X11/fonts/CID"
> > > FontPath "/usr/lib/X11/fonts/Speedo"
> > > FontPath "/usr/lib/X11/fonts/100dpi"
> > > FontPath "/usr/lib/X11/fonts/75dpi"
> > > EndSection
> > > Section "Module"
> >
> >
> > My latest info states that Load "Glcore" should be removed as well as Load "dri". Check the readme file that is generated during the install. This was running 1.0.4363 driver though.
> >
> > It may be under /usr/share/doc/nvidia-glx/README.gz
>
> I am pretty sure the 5xxx and 6xxx drivers have not required that. At
> least it works very well for me as is, and I think removing them may
> even break it now. At least it does no harm.
>
> Lennart Sorensen
I just checked. It still says these should be removed. I'm running 1.0-5336
>From file:/usr/share/doc/NVIDIA_GLX-1.0/README
If you already have an XF86Config file working with a different driver
(such as the 'nv' or 'vesa' driver), then all you need to do is find
the relevant Device section and replace the line:
Driver "nv"
(or Driver "vesa")
with
Driver "nvidia"
In the Module section, make sure you have:
Load "glx"
You should also remove the following lines:
Load "dri"
Load "GLcore"
if they exist. There are also numerous options that can be added to
the XF86Config file to fine-tune the NVIDIA XFree86 driver. Please see
Appendix D for a complete list of these options.
John
--
The Toronto Linux Users Group. Meetings: http://tlug.ss.org
TLUG requests: Linux topics, No HTML, wrap text below 80 columns
How to UNSUBSCRIBE: http://tlug.ss.org/subscribe.shtml
More information about the Legacy
mailing list