<div dir="ltr"><br><div class="gmail_extra"><br><div class="gmail_quote">On Tue, Aug 18, 2015 at 9:00 AM, Lennart Sorensen <span dir="ltr"><<a href="mailto:lsorense@csclub.uwaterloo.ca" target="_blank">lsorense@csclub.uwaterloo.ca</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><span>On Tue, Aug 18, 2015 at 06:50:00AM -0500, o1bigtenor wrote:<br>
> On Mon, Aug 17, 2015 at 4:38 PM, Lennart Sorensen <<br>
> <a href="mailto:lsorense@csclub.uwaterloo.ca" target="_blank">lsorense@csclub.uwaterloo.ca</a>> wrote:<br>
><br>
> > On Sun, Aug 16, 2015 at 10:33:49PM -0500, o1bigtenor wrote:<br>
> > > Greetings<br>
> > ><br>
> > > Managed to buy a Dell poweredge 2950II server.<br>
> > ><br>
> > > What an odyssey to set up the bios!!!<br>
> > ><br>
> > > I have 2 drives I got with the machine - - - they were part of a Raid 5<br>
> > > array.<br>
> > > Now there are only 2 drives (will never by a raid 5 array by definition)<br>
> > > and I need some way of formatting them so that I can turn them into a<br>
> > Raid<br>
> > > 1 array. (Its all hardware raid on this box.)<br>
> > ><br>
> > > Anyone with any idea on how to do that to scsi drives when the controller<br>
> > > won't let me change their settings and I have no other pox to put them<br>
> > in.<br>
> > > (Connector is a wee bit different than for SATA!)<br>
<br>
</span>That would be SAS.  SAS controllers can run SATA disks, but no the other<br>
way around.<br>
<span><br>
> > Certainly some raid controllers have an initialize option you can apply<br>
> > to disks to clean them so they can be reused in a new raid.<br>
> ><br>
> > No idea which raid controller model you are dealing with.<br>
> ><br>
><br>
> Its a Perc 5/i if that helps.<br>
<br>
</span>Well here is a handy video:<br>
<a href="https://www.youtube.com/watch?v=D5lGWdvJyS4" rel="noreferrer" target="_blank">https://www.youtube.com/watch?v=D5lGWdvJyS4</a><br>
<br>
It seems you hit control-r to enter the raid setup when prompted, then<br>
in there there is a PD management tab (PD = physical disk I suspect)<br>
<br>
Looks like control-n is how to change tabs.<br>
<br>
I found a page that says if you see 'foreign' config present, then you<br>
can hit F2 on the controller on the VD management page and ask it to<br>
clear that.<br>
<div><div><br></div></div></blockquote><div><br></div><div>Thank you very much!!<br><br></div><div>This last bit of information was what enabled me to finish my system setup.<br><br></div><div>So - - - procedure followed:<br><br></div><div>1. Ctrl R to get into the RAID utility<br></div><div>2. Use Ctrl-N to get to the Virtual Disk page<br></div><div>3. Move cursor to the line (controller) that has the word 'foreign' in it.<br></div><div>4. F2 will then take to where it asks if you want to initiailize and something else that I have now forgotten.<br><br></div><div>With the initialization one can now set up a new array (in my case a RAID 1 (for data security)).<br><br></div><div>So thank you all for your various tips and assistance - - - I now have a server with 6 disks running OpenMediaVault.<br><br></div><div>(Now if there just were someway to get this ancient BIOS to recognize discs of great than 2 TB in size and if there were a way to update the BIOS without needing to run MS windows things would be real real good!)<br><br></div><div>Dee<br></div></div></div></div>